 |
Q: How do I install the blank face on my Time Timer?
1) Remove bezel from timer. The bezel is the thin plastic piece surrounding the face of the Time Timer. 2) Remove current face. Take care not to rip or tear the red disk. 3) Install new face and make sure the left side of the "slit" is under the three plastic tabs. 4) Place bezel back into place. |
Copyright ©1999-2006 Time Timer, LLC — All rights reserved
All Time Timers are covered by U.S. PATENT NO. D369, 619 & 5,662,479
Time Timer is a registered trademark of TimeTimer, LLC